Operation Manual

0ALJ-081
Setting Up Connection by Specifying Detailed Settings
If you want to specify the security settings in detail or cannot establish the wireless connection using the other procedures, manually
enter all the required information for the wireless LAN connection. Before specifying detailed settings, check and write down the required
information, including the SSID, network key, and wireless security protocols (
Checking the SSID and Network Key).
Press .
Use / to select <Network Settings>, and press .
If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press . Logging on to the
Machine
Select <Wireless LAN Settings>, and press .
If the <Do you want to enable the wireless LAN?> message is displayed, select <Yes>, and press .
Read the message that is displayed, and press .
Select <SSID Settings> <Enter Manually>.
Enter the SSID that you have written down, and press <Apply>.
Entering Text
Specify the security settings based on the information that you have written down.
If you do not need to specify the security settings, select <None>, and press .
Using WEP
1
Select <WEP>, and press .
2
Select an authentication method, and press .
<Open System>
Sets open system authentication, which is also called "open authentication."
<Shared Key>
Uses the WEP key as a password.
NOTE:
When <Open System> is selected
When connecting to a wireless LAN, the machine experiences an authentication error if the shared key
authentication is set on the wireless router. If this happens, the machine automatically changes the setting to
<Shared Key> and retries the connection.
3
Select <Edit WEP Key>, and press .
1
2
3
4
5
6
7
㻟㻟㻟㻌㻛㻌㻢㻣㻢