User Guide

4-2
Sending Faxes (MF4140/MF4150 Only)
Enter the Fax Number Send the Document
Dial the recipient’s fax number with
the numeric keys.
Press [Start].
When you set the document on the platen glass, press
[Start] for each document. When scanning is complete,
press [OK].
If <CONFIRM NEW DEST.> is set to <ON> in the <TX
SETTINGS> of the <FAX SETTINGS> menu, you need
to enter the fax number again after pressing [Start].
What if...
● You enter a wrong number:
Go back to the wrong digit with [ ],
then press [Clear] to delete it. Or press
and hold [Clear] to delete the entire
entry. Then try again.
What if...
● You press [Stop/Reset] to cancel a
job during scanning documents or
after scanning documents:
The <CANCEL DURING TX/RX?>
message appears. Press [ ] to select
<Yes>.
3
4
Ex.
=012XXXXXXX_