Operation Manual

Conguring SNTP

2JRY-015

Simple Network Time Pr

otocol (SNTP) enables you to adjust the system clock by using the time server on the network.

If SNTP is used, the time server is checked at the specied intervals; therefore, the correct time can always be

maintained. The time is adjusted based on Coordinated Universal Time (UTC), so specify the time zone setting before

conguring SNTP (

Setting the Date/Time(P. 9) ). SNTP settings can be specied via the Remote UI.

● The SNTP of the machine supports both NTP (version 3) and SNTP (versions 3 and 4) servers.

● For mor

e information about the basic operations to be performed when setting the machine from the

Remote UI, see

Setting Up Menu Options from Remote UI(P. 205) .

Start the Remote UI and log in to System Manager Mode. Starting Remote

UI(P

. 198)

Click [Settings/Registration] on the Portal page.

Remote UI Screen(P. 199)

Select [Network Settings] [TCP/IP Settings].

Click [Edit] in [SNTP Settings].

Select the [Use SNTP] check box and specify the required settings.

[Use SNTP]

Select the check box to use SNTP for synchronization. If you do not want to use SNTP, clear the check box.

[NTP Server Name]

Enter the IP address of the NTP or the SNTP server. If DNS is available on the network, you can enter a host

name (or FQDN) consisting of alphanumeric characters instead (example: ntp.example.com).

[Polling Interval]

Specify the interval between one synchronization and the next.

Click [OK].

Setting Up