Film Camera User Manual

156  Wi-Fi Functions
3 Enter the details of the FTP server.
* An interface similar to the virtual keyboard for text fields (A 88) will appear
except it will contain only the keys necessary for this step.
• The destination folder may differ depending on the FTP server. Check
the FTP server's settings.
• A confirmation screen will appear.
4 Save the settings of the connection point.
• Before touching [Yes], you can touch [Check Current Configuration]
to review the network settings.
Transferring Recordings
1 Power the camcorder using the compact power adapter.
Do not disconnect the power source or turn off the camcorder until the
transfer is completed.
2 Set the camcorder to playback mode and then press .
3 Touch [ Wi-Fi] and then touch [Transfer Files].
If the memory card slot cover is open, the option will not be available.
Make sure the cover is closed properly.
4 Select the memory that contains the recordings you wish to
transfer wirelessly and touch [OK].
• You can select more than one memory.
• Touch [All files] to transfer all the recordings, or [New files] to transfer
only those recordings that have not been previously transferred.
• Once connected, the wireless transfer will begin automatically.
• You can touch [Stop] and then [X] to cancel the wireless transfer
while it is in progress.
5Touch [OK].
[w] > Enter* the IP address for [FTP Server] and [21] for [Port]
> [OK] > Enter the user name and password > [OK] >
Enter [/] for [Destination Folder] > [OK]
[Yes] > [OK] > [X]
COPY