Film Camera User Manual

152  Wi-Fi Functions
To enter text for the various settings, use the virtual keyboard (A 88).
POINTS TO CHECK
• You may need to know in advance the encryption key and other set-
tings of the wireless router. Refer to the wireless router's setup screen or
ask the network administrator.
1 Set the camcorder to playback mode and then press .
2 Set up a new connection point.
* To replace the settings of an existing connection point, touch [Edit] instead and
then manually change the settings. To delete the settings, touch [Delete] and
then [Yes].
• You can set up up to three connection points for infrastructure mode
([ 1] to [ 3]). Once set up, you can use the same Wi-Fi network
without any further settings.
• The camcorder will automatically detect available nearby Wi-Fi
networks and display their SSID.
3Touch [Í] or [Î] to select the desired access point and then
touch [OK].
• Wi-Fi networks with a stealth function that do not broadcast their
network name will not be detected by the camcorder. To use such an
access point, touch [Enter Manually] and perform the procedure
described in To manually enter a wireless access point (A 153).
• If the desired access point is protected, the C icon will appear next
to the network name. In such case, continue to step 4; otherwise,
skip to step 5.
4 Touch the [Encryption Key] control button to enter the encryption
key or password of the wireless access point and then touch [OK].
• If the encryption method of the wireless access point is set to WEP,
the WEP index key will appear on the screen. Select the same index
key of the access point.
[Wi-Fi] > [Wi-Fi Setup] > [Network Setup] >
Desired connection point ([ 1] to [ 3]) > [Set Up
New]* > [Manual Setup]
COPY