Camcorder User Manual

External Connections  119
NOTES
• When converting scenes in the playlist or video snapshot index
screen:
-The scenes are converted with the selected background music
( 69) instead of the original sound.
-All the selected scenes are merged into one converted scene.
However, if the converted scene is too large, it will be split into scenes
that are 10 minutes long each.
-The playlist cannot be converted when its total playback time exceeds
2 hours and 30 minutes.
• The time required to convert scenes is approximately equal to the
scene’s total running time. Because conversion generally takes longer
on a computer, we recommend using the camcorder to convert scenes.
• You can play back the converted scenes from the [For Web (MPEG-2)]
index screen on the memory card. Open the original movies index
screen on the memory card, press and then
select [For Web
(MPEG-2)].
Connecting to the Computer and Uploading your Videos
If you are connecting the camcorder to the computer immediately after
the conversion described in the previous section, start this procedure
from step 3 below. Otherwise, start this procedure from the beginning.
1 Power the camcorder using the compact power adapter.
2 Open the [For Web (MPEG-2)] index screen on the memory card.
Open the original movies index screen on the memory card, press
then select [For Web (MPEG-2)].
3 Connect the camcorder to the computer using the supplied USB
cable.
• Connection . Refer to
Connection Diagrams ( 102).
•If the device selection screen appears, select [Computer/Printer] and
press .
• On the computer, ImageMixer 3 SE will launch automatically and the
startup screen (ImageMixer 3 Launcher) will appear.
4 Click [Web upload] and continue the operation on the computer
following the software’s indications.
• See also ‘ImageMixer 3 SE Software Guide’.
INDEX SEL.
INDEX SEL.
4