Camcorder User Manual

External Connections  119
Connecting
Connect the camcorder to the VCR using Connection C or 3. Refer to
Connection Diagrams (0 107).
Recording
1 External device: Load a blank media and set the device to record
pause mode.
2 Turn on the camcorder and set it to mode.
• We recommend powering the camcorder using the compact power
adapter.
• Verify that 6 8 [AV/Headphones] is set to [H AV].
3 Camcorder: Locate the scene you wish to copy and pause the
playback shortly just before the desired scene.
4 Camcorder: Resume playback.
By default, onscreen displays will be embedded in the output video
signal. You can change the displays by repeatedly pressing h.
5 External recorder: Start recording when the scene you wish to
copy appears; stop recording when it ends.
6 Camcorder: Stop playback.
Uploading Movies to Video Sharing Web Sites
You can convert your high-definition video recordings into standard
definition in order to upload them to your favorite video sharing Web
site.
// You can complete the conversion to standard defini-
tion in the camcorder and then use the supplied PIXELA’s software to
upload your videos to the Web. You can even decorate scenes before
or during conversion. If you are using an Eye-Fi card, after converting
your video recordings into standard definition scenes you can upload
your movies wirelessly, directly from the camcorder. Refer to Eye-Fi’s
homepage for the latest information on compatible Web sites.