User Guide

COPYRIGHT © 1996 CANON INC. CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
3–228
3. OPERATIONS AND TIMING
H. *5* OPTION (settings mode)
• Use this mode to set/change various machine settings (specifications).
• Each press on the key brings up the next screen; each press on the key, on the other
hand, brings up the previous screen.
• Press the desired item (notation on the screen) to highlight.
• Use the keypad to enter numbers.
• A press on the key will permanently store the entered value.
• When done, be sure to turn off and then on the main power switch.
1. Setting the Copy Count and Shut-Off Slant Mode
CANCEL
+
OK
–
*5* OPTION 1
COPY-LIM (100) : 100 <- (000)
SHUT_OFF (OFF : 1) : 0 <- (0)
IM-ANGLE : 0 <- (0)
COIN_OPERT : 0 <- (0)
DRM_MSG : 0 <- (0)
Item
COPY-LIM
SHUT_OFF
IM-ANGLE
COIN_OPERT
DRM_MSG
Function
Use it to change the upper
limit imposed on the copy
count.
Use it to enable/disable
the sleep function.
Use it to switch slant
mode.
Coinvender switching
Use this to switch the
“Replace Drum” message.
Description
You may change the upper limit imposed on
the copy count between 1 and 100 (copies).
You may disable the auto shift function (time)
to sleep state.
Copies made in slant mode may become
jagged; change the setting of this mode from
‘0’ to ‘1’ if such a problem is noted.
Select ‘1’ to support a coin vender.
0: Will not indicate the Replace Drum mes-
sage on the control panel.
(default in 230V model)
1: Will indicate the Replace Drum message.
(default in 120V model)
OK