User Guide

H. Making Overlay Copies

1. Outline

Figure 3-628-1 shows the paper path used to make overlay copies.

Copy paper that has moved through the fixing assembly is sent to the lower feeding assembly by the

movement of the paper deflecting plate*. In the lower feeding assembly, the set-back roller puts the incom-

ing sheet in a staggered stack and waits for the next sheet.

When picked up from this stack (re-pick up), copy paper is discharged by the movement of the paper

deflecting plate 1**.

* The paper deflecting plate 1 solenoid (SL5) turns ON to rotate the paper deflecting plate 1 counter-

clockwise.

** The paper deflecting plate 1 solenoid (SL5) turns OFF so that the paper deflecting plate 1 is restrained

by the force of the spring.

Figure 3-628-1

SL5

OFF

Paper deflecting plate 1

Delivery roller

Fixing assembly

Set-back roller

Registration roller

Vertical path roller 1

Re-pick up roller

Details of the movement of

the paper deflecting plate

Flow of copy paper

Force of

spring

< Pulling into the lower feeding assembly

for reversed delivery when copying on the

1st side of an overlay copy >

< Copying on the 1st side of a two-sided

copy when delivering the last copy >

3–104

3. OPERATIONS AND TIMING