User Guide

Chapter 2: Service Error Codes
2-24
Cause Remedy
##200 [ RX ] During image reception, a carrier is not
detected for 5 sec
• Ask the operator of the other party to in-
crease the transmission level
*1
so that the
image signal may be received correctly.
• Ask the operator of the other party to de-
crease the transmission start speed.
• Provide
echo remedy 3
*7
.
•
Decrease the transmission level
*1
so that
an echo of transmitted CFR will not be re-
ceived.
• The line condition is poor, and the image
signal cannot be received.
• The training signal cannot be received be-
cause of an echo of CFR, causing a time-
over condition.
Cause Remedy
##201 [TX/RX] DCN was received through a non-normal
procedure
• The other party is not ready for reception
(e.g., out of recording paper).
• The user telephone number has not been
registered (if the receiving machine is a
RICOH 3000L).
• During reception, a talk reservation was
made; however, a call was not answered.
• Ask the operator of the other party to set
the machine for reception (as by setting re-
cording paper).
• Register the user telephone number.
• Contact the other party by telephone.