Specifications

COPYRIGHT © 1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
5-7
CHAPTER 5 ERROR CODE
##103 (reception) EOL not detected for 5 sec during reception
Cause Remedy
• The line condition is poor, and the image sig-
nal cannot be received properly.
• An echo of CFR caused malfunction.
1. Raise the transmission level of the modem
using parameter 07 of #2 MENU to ensure
proper reception of image signals.
2. Request the other party to lower the transmis-
sion start speed.
3. Adjust the NL equalizer using parameter 05 of
#2 MENU so as to ensure proper reception of
image signals.
1. Provide measures against echoes by referring
to the descriptions under #1SSSW SW03.
2. Lower the transmission level of the modem
using parameter 07 of #2 MENU so as to pre-
vent reception of echoes of CFR.
##104 (transmission) RTN or PIN received during transmission
Cause Remedy
• The condition of the line is poor, and the other
party cannot receive image signals properly.
• The other device malfunctioned as a result of
echoes.
1. Raise the transmission level of the modem
using parameter 07 of #2 MENU so that the
other device can receive image signals proper-
ly.
2. Lower "transmission start speed" under "sys-
tem control" in user mode.
3. Attach an echo protect tone to the V.29
modem signal using bit 1 of SW03 under #1
SSSW.
4. Request the other party to relax the RTN
transmission conditions so that the other
device will not transmit RTN.
5. Adjust the NL equalizer using parameter 05 of
#2 MENU so that the other device may receive
image signals properly.
1. Provide measures against echoes by referring
to the descriptions under #1 SSSW SW03.
2. Add a longer pause at the end of the tele-
phone number when registering for auto dial
so as to prevent responding to the first DIS
from the other device.
3. Press the Start key after hearing the first DIS
from the other device in manual ringing.
4. Request the other party to lower the transmis-
sion level of the other device so that the other
device will not receive echoes.