FAXPHONE L180 Starter Guide

9
Connect Telephone Cables and Install Handset
Connect Telephone Cables Install Handset
Connect the supplied telephone line cord to the line jack (A) in the illustration and the wall jack.
Connect the handset cord to the handset jack (C) in the illustration.
Connect any external device to the external device jack (B) in the illustration if required.
1
Insert the plugs with pins (A) into the holes on the
handset cradle.
NOTE
Do not insert the pins all the way into the plugs at this
point.
2
Insert the plugs (with the cradle) into the holes on
the machine.
3
Carefully push the pins into the plugs as far as they
will go.
4
Place the handset on the cradle.
NOTE
If using the handset or an external telephone, make sure
to set the fax receive mode to <FaxTel>, <Manual>, or
<DRPD>. For how to set the receive mode, see Chapter 7,
“Receiving Faxes,” in the Basic Guide.
A
B
C
A
10