Instruction manual

Using Fully Automatic Wireless Flash

Flash exposure compensation and other settings set with the master

unit will also be automatically set

the slave units. Thus, you need not

operate the slave unit(s). Wireless flash with the following settings can

be done

the same way as with normal flash shooting.

· Flash exposure compensation

· High-speed sync (FP flash)

lock

·FEB

. Manual flash

. Stroboscopic flash

ril

With

lock, if even one Speedlite will result

underexposure, the <

icon will blink

the viewfinder. Open the aperture more or move the slave

unit closer to the subject.

Setting the Communication Channel

If there is another Canon wireless flash system nearby, you can change

the channel No. to prevent signal confusion. Both the master and slave

units must be set to the same channel No.

m»Zoom

:;K>.

Ell

. .

~=,

1 Press the

button

••

< so that

<m.>

blinks.

Set the channel No.

$ Turn the

> dial to select the

channel number, then press the

<@>

button.