Instruction manual

M:
Manual Flash
You
can set the flash output from 1/128 power
to
1/1
full power
in
1/3-
stop increments.
Use a hand-held flash meter to determine the required flash output to
obtain a correct flash exposure.
Zoom
SOmm
'/ '
I I
0.5
0.7
1 1.5 2 3 4 6 9
13
18 m
1 Press the
<MODE>
button so
that
< M>
is
displayed.
M
Zoom
SOmm
-
0.5
0.7
1 1.5 2 3 4 6 9
13
18 m
2
Set the flash output.
.. Press the
<@>
button.
....
The flash output blinks.
Turn the
<@>
dial to set the flash
output, then press the
<@> button.
iii
Press the shutter button halfway to
see the effective flash range
displayed.
Flash Output Display
When you change the flash output during shooting, the table below
makes it easier
to
see how the stop changes such
as
1/2 -0.3
~
1/2
~
1/2
+0.3.
You
can see how the stop changes when you increase or
decrease the flash output.
For example, when you decrease the flash output to 1/2, 1/2 -0.3, or 1/2
-0.7, and then increase the flash output to more than 1/2, 1/2 +0.3, 1/2
+0.7, and
1/1
will
be
displayed.
(Example)
Figures for decreased flash output
~
1/1
1/1
-0.3
1/1
-0.7
1/2
1/2 -0.3 1/2 -0.7
1/4
1/2 +0.7 1/2 +0.3 1/4 +0.7 1/4 +0.3
~
Figures for increased flash output
22
•••
•••