User's Manual

122

If the subject is on the side of the frame and you use flash, the subject may

turn out to be too bright or dark depending on the background, etc. This is

when you should use FE lock. After setting the proper flash exposure for

the subject, you can recompose (put the subject toward the side) and

shoot. This feature can also be used with a Canon EX-series Speedlite.

* FE stands for Flash Exposure.

Press the <D> button.

X The built-in flash will rise.

Press the shutter button halfway and

look in the viewfinder to check that

the <D> icon is lit.

Focus the subject.

Press the <A> button. (8)

Aim the spot metering circle over the

subject, then press the <A> button.

X The flash will fire a preflash and the

required flash output is calculated

and retained in memory.

X In the viewfinder, “FEL” is displayed

for a moment and <d> will light up.

Each time you press the <

> button, a

preflash is fired and the required flash output

is calculated and retained in memory.

Take the picture.

Compose the shot and press the

shutter button completely.

X The flash is fired when the picture is

taken.

A Locking the Flash ExposureN

Spot metering circle

If the subject is too far away and beyond the effective range of the flash,

the <D> icon will blink. Get closer to the subject and repeat steps 2 to 4.

FE lock cannot be used during Live View shooting.

COPY