User's Manual

120
3 Auto Exposure BracketingN
Follow steps 1 and 2 to turn off the AEB level display.
The AEB setting will also be canceled automatically if the power
switch is set to <2>, flash recycling is completed, etc.
Using AEB with continuous shooting
If <i> continuous shooting (p.101) is set and you press the shutter
button completely, the three bracketed shots will be taken
continuously in this sequence: standard exposure, decreased
exposure, and increased exposure.
Using AEB with <u> single shooting
Press the shutter button three times to take the three bracketed
shots. The three bracketed shots will be exposed in the following
sequence: standard exposure, decreased exposure, and increased
exposure.
Using AEB with the self-timer or a remote controller (sold
separately)
With the self-timer or a remote control shooting (<Q> or <l>),
you can take three continuous shots after a 10-sec. or 2-sec. delay.
With <q> (p.103) set, the number of continuous shots will be three
times the number set.
Canceling AEB
Shooting Tips
AEB cannot be used with flash, [Multi Shot Noise Reduction], or bulb
exposures.
If [z2: Auto Lighting Optimizer] (p.123) is set to any setting other
than [Disable], the AEB’s effect may be minimal.
COPY