EOS DIGITAL REBEL XSi/EOS 450D Instruction Manual

44
1
Set the Mode Dial to <1>.
2
Aim any AF point over the
subject.
All the AF points will operate, and
focus will generally be achieved at
the AF point covering the closest
object.
Aiming the center AF point over the
subject will make focusing easier.
3
Focus the subject.
Press the shutter button halfway, and
the lens will move to focus.
X The dot inside the AF point achieving
focus flashes briefly in red. At the
same time, the beeper will sound and
the focus confirmation light <o> in
the viewfinder will light.
X If necessary, the built-in flash will pop-
up automatically.
4
Take the picture.
Press the shutter button completely to
take the picture.
X The captured image will be displayed
for about 2 sec. on the LCD monitor.
If the built-in flash has popped up,
you can push it back down with your
fingers.
1 Fully Automatic Shooting
AF point
Focus confirmation light
H73_02.fm Page 44 Monday, November 12, 2007 3:33 PM