User's Manual

130
3 Lens Peripheral Illumination / Chromatic Aberration Correction
1
Select the setting.
Check that [Correction data
available] is displayed for the
attached lens.
Select [Chromatic aberration], then
press <0>.
Select [Enable], then press <0>.
If [Correction data not available] is
displayed, see “About the Lens
Correction Data” on the next page.
2
Take the picture.
The image will be recorded with the
chromatic aberration corrected.
Chromatic Aberration Correction
With [Enable], the maximum burst for continuous shooting will greatly
decrease.
If you play back a 1 image shot with the chromatic aberration
corrected, the image will be displayed on the camera without the
chromatic aberration correction applied. Check the chromatic aberration
correction with Digital Photo Professional (provided software, p.364).
COPY