User's Manual

You can select the AF (autofocus) mode to suit the shooting conditions

or subject. In Basic Zone modes, the most suitable AF mode is set

automatically.

On the lens, set the focus mode

switch to <AF>.

Press the <ZE> button.

X [AF mode] will appear.

Select the AF mode.

Press the <U> key or turn the

<6> dial to select the desired AF

mode, then press <0>.

Focus the subject.

Aim the AF point over the subject and

press the shutter button halfway. The

camera will then autofocus in the

selected AF mode.

Suited for still subjects. When you press the shutter button

halfway, the camera will focus only once.

When focus is achieved, the dot inside the AF point achieving focus

lights briefly in red, and the focus confirmation light <o> in the

viewfinder will also light.

With evaluative metering (p.102), the exposure setting will be set at

the same time focus is achieved.

While you hold down the shutter button halfway, the focus will be

locked. You can then recompose the shot if desired.

E: Changing the Autofocus ModeN

One-Shot AF for Still Subjects

COPY