User's Manual

The built-in flash and external Speedlite settings can be set with the

camera’s menu. You can use the camera’s menu to set the external

Speedlite function settings only if the attached EX-series Speedlite is

compatible with this function.

The setting procedure is the same as setting a camera menu function.

Select [Flash control].

Under the [1] tab, select [Flash

control], then press <0>.

X The flash control screen will appear.

Normally, set this to [Enable].

If [Disable] is set, neither the built-

in flash nor the external Speedlite

will fire. This is useful when you only

want to use the flash’s AF-assist

beam.

For normal flash exposures, set this

to [Evaluative].

[Average] is for advanced users. As

with an external Speedlite, the

metering area is averaged. Flash

exposure compensation may be

necessary.

3 Setting the FlashN

[Flash firing]

E-TTL II Metering Modes

Even if [Flash firing] has been set to [Disable], if focus is difficult to achieve

in low light, the built-in flash may still fire a series of flashes (AF-assist

beam, p.86).

COPY