Instruction Manual

86
In the <2>, <3>, <4>, <5>, and <C> Basic Zone modes, you can
shoot while the settings match the lighting or scene type. Normally, [
Default setting] is adequate, but if the settings match the lighting
condition or scene, the picture will look more accurate to your eye.
For Live View shooting, if you set both [Light/scene-based shots] and
[Ambience-based shots] (p.82), you should first set [Light/scene-
based shots]. This will make it easier to see the resulting effect on the
LCD monitor.
1
Set the Mode Dial to any of the
following modes: <2>, <3>,
<4>, <5>, or <8>.
For <8>, set it to <C>.
2
Display the Live View image.
Press the <A> button to display the
Live View image.
Shoot by Lighting or Scene Type
Lighting or scene 2 3 4 5
8
C
Default setting
k k k k k
Daylight
k k k k k
Shade
k k k k k
Cloudy
k k k k k
Tungsten light
k k k k
Fluorescent light
k k k k
Sunset
k k k k k