Instruction Manual

When shooting a human subject in candlelight, use <x> (Candlelight).

The candlelight color tones will be retained in the photo.

Use the center AF point to focus.

Aim the center AF point in the viewfinder over the subject, then shoot.

Prevent camera shake if the shutter speed in the viewfinder

blinks.

Under low light when camera shake is prone to occur, the

viewfinder’s shutter speed display will blink. Hold the camera steady

or use a tripod. When using a zoom lens, use the wide-angle end to

reduce blur caused by camera shake even while handholding the

camera.

Change the color tone.

You can change [Color tone]. To increase the candlelight’s reddish

tinge, set it toward [Warm tone]. Set it toward [Cool tone] if it looks

too red.

x Shooting Candlelight Portraits

Shooting Tips

Live View shooting cannot be used.

Flash shooting is not possible. In low light, the AF-assist beam may be

emitted (p.106).