Digital Camera User Manual

If you set the power to <1> and the time zone/date/time setting

screen appears, see page 40 to set the time zone and date/time.

Pressing the power button toggles

between <1> and <2>.

With the power <2>, holding down

the <x> button for 2 sec. or longer will

start the playback mode.

When an EF-M lens is attached to the

camera and the power is off, the

aperture stops down to shut out the

light and protect the inside of the

camera. When you set the power to

<1> or <2>, the aperture

makes a small noise as it opens.

When you set the power to <1>/<2> or if [Camera auto off]

takes effect and the camera turns off, the image sensor will be

cleaned automatically (making a small noise). During the image

sensor cleaning after intentionally turning the camera <2>, the

LCD monitor will display <f>.

If you repeatedly switch the power to <1>/<2> at a short

interval, the <f> icon may not be displayed. This is normal and

not a problem.

The automatic self-cleaning of the image sensor can be enabled or

disabled with the menu (p.225).

Turning on the Power

About the Automatic Self-Cleaning Sensor

COPY