EOS M Instruction Manual

Shoot by Ambience Selection
90
3
Set the ambience effect.
Tap the item shown in the figure so
that [Effect] appears on the bottom of
the screen.
Tap the effect’s level and setting.
4
Take the picture.
Press the shutter button.
If you change the shooting mode or
set the power to <2>, the setting
will revert back to [ Standard
setting].
The LCD monitor image shown with the ambience setting applied will not
look exactly the same as the actual photo.
Using flash may minimize the ambience effect.
In bright outdoors, the LCD monitor image you see may not have exactly
the same brightness or ambience as the actual photo. Set [52: LCD
brightness] to 4 and look at the LCD monitor image while the screen is
unaffected by stray light.
COPY