EOS Utility for Macintosh Instruction Manual (for EOS DIGITAL cameras released in 2006 or earlier)

9
1
2
3
4
Introduction
Contents at
a Glance
Downloading
Images
Camera
Settings
Remote
Shooting
Reference
Preferences
Index
Connect the camera and computer with the interface cable provided
with your camera.
1
Connect the plug of the cable with the < > mark
into the computer’s USB port.
O For the location and direction of the USB port, refer to the
computer User’s Manual.
2
Connect the plug of the cable with the < > mark to
the < > terminal on your camera.
O Connect with the < > mark on the plug facing the back of the
camera.
O Image downloading preparation is now complete. Continue with
“Starting up EU” (Description on the right).
Connecting the D60, D30 and a Computer
Starting up EU
When the camera’s power switch is set to < ON >, EU will start up, and
the camera and computer will be able to communicate.
1
Set the camera’s power switch to < ON >.
O When the [Welcome to iPhoto!] dialog box appears, click the
[Decide Later] button. If the iPhoto starts at this time, quit iPhoto.
2
Click the [EOS Utility] icon registered in the Dock.
¿ EU starts up, the main window appears, and your camera and
computer can now communicate. Continue with “Batch
Downloading Images to Your Computer” (p.10).
O If you set the camera’s power switch to < ON >, EU may start up
automatically depending on your computer system.
O With the , the camera’s LCD monitor
blinks when EU starts up.
EU Main window
30D
REBELXTi
400D
COPY