EOS Utility 2.6 for Macintosh Instruction Manual

5
1
2
3
4
Introduction
Contents at
a Glance
Downloading
Images
Camera
Settings
Remote
Shooting
Reference
Preferences
Index
Connecting the Camera and Computer
To download to your computer images shot with your camera, you will
need to connect your camera and computer using the interface cable
provided with your camera.
1
Connect the large plug of the cable into the USB port
of your computer.
O For the location and direction of the USB port, refer to the
computer User’s Manual.
2
Connect the small plug of the cable into the < >
terminal on your camera.
O Connect the plug with the < > mark facing the front of the
camera.
O Image downloading preparation is now complete. Continue with
“Starting up EU”.
O With , you can fix the plug to the camera with
the cable protector to prevent the plug from disconnecting. For
details on using, refer to p.51.
1Ds Mk III
1D Mk III
Starting up EU
When the camera’s power switch is set to < ON >, EU will start up, and
the camera and computer will be able to communicate.
Set the camera’s power switch to < ON >.
¿ EU starts up, the main window appears, and your camera and
computer can now communicate. Continue with “Batch
Downloading Images to Your Computer”.
O The camera’s LCD monitor turns on when EU starts up.
O You can operate the camera and download images saved on the
memory card inserted in the camera to your computer. Refer to
your camera’s Instruction Manual for details.
O cannot communicate with EU if the camera’s
mode dial is set to < >. Set the mode dial to a mode other
than < >.
EU Main window
REBELT1i
500D
COPY