EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2.1 Updater)

Shot Settings
W-79
W
4
Specifying Camera Settings in the EOS Viewer Utility
¿ With the EOS-1Ds and EOS-1D, the following dialog box appears.
4
Click the [Apply to camera] button.
¿ The [Confirm settings] dialog box appears.
5
Confirm the settings and click the [Yes] or [Apply to Camera] button.
¿ The parameter is registered on the
camera.
6
Click the [Close] button.
¿ The [Parameters settings] dialog box closes.
EOS-1Ds EOS-1D
[Standard]:
The standard tone curve is set.
[TCD1] through [TCD3], [User Defined]:
The tone curve that has been loaded in
“Specifying the Tone Curve” (W-80) is set.
Higher values give higher levels of edge
sharpening.
Higher values give a lower compression ratio
and higher image quality.
The tone curve to be
registered in [TCD1]
through [TCD3] or [User
Defined] is set (W-80).
Adds a new set.
*Displayed when connected to
the EOS-1D.
Deletes when selected set.
*Displayed when connected to
the EOS-1D.