EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2.1 Updater)

M-77
M
4
Specifying Camera Settings in the EOS Viewer Utility
Shot Settings
You can specify various shot settings, such as processing parameters, tone curve, personal
white balance settings, color matrix, and JPEG quality, and then apply these settings to the
camera.
1
Display the [Camera settings] dialog box (M-56).
2
Select the [Shoot settings] tab.
¿ The [Shoot settings] tab sheet
appears.
O With the EOS-1Ds and EOS-1D,
select the [Detailed Settings] tab.
3
Click one of the buttons to display each dialog box.
O With the EOS-1Ds and EOS-1D, the [Tone curve], [Color matrix] and [JPEG quality]
buttons are not displayed.
4
Click the [OK] button.
¿ The settings are applied to the camera and the [Camera settings] dialog box closes.
Allows you to select tone
curves, specify the sharpness
and contrast, and then register
these settings on the camera
(M-78).
Loads the saved tone curves,
and allows you to select color
channels and register them
on the camera (M-80).
Loads the personal white
balance settings, and then
registers them on the camera
(M-82).
Allows you to select color matrix
settings and then register them
on the camera (M-84).
Allows you to specify JPEG
quality settings (L, M1, M2, S),
and register them on the
camera (M-86).
Applies the settings that you have specified in all the tab sheets
to the camera and closes the [Camera settings] dialog box.
Applies the settings that you have
specified in the [Shoot settings]
tab sheet to the camera.
*With the EOS-1Ds and EOS-1D,
the [Apply] button is displayed.
Restores the parameters to their original ones
and closes the [Camera settings] dialog box.
Allows you to select tone
curves, specify the sharpness
and contrast, and then register
these settings on the camera
(M-78).