EOS C300, EOS C300 PL Instruction Manual

37
Preparing the Camcorder
Removing the Monitor Unit
1Set the Q switch to OFF.
2 Disconnect the monitor unit’s cables from the camcorder’s EXT 1 and EXT 2 terminals.
• Pull back the metallic tips of the cable to release the cable and then disconnect the cable.
3 Unscrew the lock screw and then gently slide out the monitor unit from the accessory shoe.
Using the Viewfinder
Adjusting the Viewfinder’s Position
1 Gently pull out the viewfinder until it stops.
2 Adjust the viewfinder’s angle as necessary.
Attaching and Detaching the Eye Cup
Attach the eye cup so that it covers the rubber portion of the viewfinder
unit.
• The dioptric adjustment dial can be operated even with the eye cup
attached.
• For left eye use, attach the eye cup so that the protruding portion faces
the opposite side.
Detach the eye cup as shown in the illustration.
Eye cup
Viewfinder
unit