User's Manual

If the image comes out dark or the contrast is low, the brightness and

contrast can be corrected automatically. With JPEG images, the

correction is done when the image is captured. For RAW images, it can

be corrected with Digital Photo Professional (provided software).

The default setting is [Standard].

Select [Auto Lighting Optimizer].

Under the [2] tab, select [Auto

Lighting Optimizer], then press

<0>.

Set the correction setting.

Turn the <5> dial to select the

setting, then press <0>.

Take the picture.

The image will be recorded with the

brightness and contrast corrected if

necessary.

3 Auto Lighting OptimizerN

Sample of corrected brightness

Depending on the shooting conditions, noise might increase.

If a setting other than [Disable] is set and you use exposure

compensation, flash exposure compensation, or manual exposure to

darken the exposure, the image might still come out bright. If you want

the darker exposure, set this to [Disable] first.

In fully-automatic modes (1/C), [Standard] will be set automatically.

COPY