User's Manual

Icons in this Manual

<6> : Indicates the Main Dial.

<5> : Indicates the Quick Control Dial.

<9> : Indicates the Multi-controller.

<0> : Indicates the setting button.

0, 9, 7, 8: Indicates that the respective function remains

active for 4 sec., 6 sec., 10 sec., or 16 sec.

respectively after you let go of the button.

* In this manual, the icons and markings indicating the camera’s buttons, dials,

and settings correspond to the icons and markings on the camera and on the

LCD monitor.

3: Indicates a function which can be changed by pressing the

<M> button and changing the setting.

M : When shown on the upper right of the page, it indicates that the

function is available only when the Mode Dial is set to d, s,

f, a, or F.

* Function which cannot be used in the fully-automatic modes (1/C).

(p.**) : Reference page numbers for more information.

: Tip or advice for better shooting.

: Problem-solving advice.

: Warning to prevent shooting problems.

: Supplemental information.

Basic Assumptions

All operations explained in this manual assume that the power switch

is already set to <1> (p.27).

<5> operations explained in this manual assume that the Quick

Control Dial switch is already set to <J>.

It is assumed that all the menu settings and Custom Functions are

set to the default.

For explanatory purposes, the instructions show the camera attached

with an EF-S15-85mm f/3.5-5.6 IS USM lens.

Conventions Used in this Manual

COPY