User's Manual

187

Dust which could not be removed by the automatic sensor cleaning can

be removed manually with a blower, etc.

The surface of the image sensor is extremely delicate. If the

sensor needs to be cleaned directly, having it done by a Canon

Service Center is recommended.

Before cleaning the sensor, detach the lens from the camera.

Select [Sensor cleaning].

Under the [6] tab, select [Sensor

cleaning], then press <0>.

Select [Clean manually].

Turn the <5> dial to select [Clean

manually], then press <0>.

Select [OK].

Turn the <5> dial to select [OK],

then press <0>.

X In a moment, the reflex mirror will

lockup and the shutter will open.

“CLn” will blink on the LCD panel.

End the cleaning.

Set the power switch to <2>.

3 Manual Sensor CleaningN

As the power source, using the AC Adapter Kit ACK-E6 (sold separately)

is recommended.

If you use the battery, make sure it is fully recharged. If a battery grip with

size-AA/LR6 batteries is attached, manual sensor cleaning will not be

possible.

COPY