User's Manual

114

D Using the Built-in Flash

FE (flash exposure) lock obtains and locks the correct flash exposure

reading for any part of a subject.

Press the <D> button to pop-up

the built-in flash.

Press the shutter button halfway and

look in the viewfinder to check that

the <D> icon is lit.

Focus the subject.

Press the <B> button. (8)

Aim the viewfinder center over the subject

where you want to lock the flash

exposure, then press the <

> button.

X The flash will fire a preflash and the

required flash output is calculated

and retained in memory.

X In the viewfinder, “FEL” is displayed

for a moment and <d> will light.

Each time you press the <

> button, a

preflash is fired and the required flash output

is calculated and retained in memory.

Take the picture.

Compose the shot and press the

shutter button completely.

X The flash is fired to take the picture.

B: FE LockN

If the subject is too far away and beyond the effective range of the flash, the

<D> icon will blink. Get closer to the subject and repeat steps 2 to 4.

COPY