Operation Manual

146
Connecting the camera to a TV set is recommended to play back the
movies shot.
When the shooting mode is set to any mode other than < a >,
autoexposure control will take effect to suit the scene’s current brightness.
1
Set the power switch to <k>.
X The reflex mirror will make a sound,
then the image will appear on the
LCD monitor.
2
Set any shooting mode except
<a>.
3
Focus on the subject.
Before shooting a movie, focus with
AF or manual focus (p.137-140, 142).
By default, [Movie Servo AF:
Enable] is set so that the camera will
always focus.
4
Shoot the movie.
Press the <A> button to start
shooting a movie. To stop movie
shooting, press <A> again.
X While the movie is being shot, the
“o” mark will be displayed on the
upper right of the screen.
X Sound will be recorded by the built-in
microphones.
k Shooting Movies
Autoexposure Shooting
Recording movie
Built-in microphones