Operation Manual

139
Using AF to Focus (AF Method)
2
Select the AF point.J
Pressing <0> or the <L> button will
toggle between automatic selection
and zone selection. In Basic Zone
modes, automatic selection is set
automatically.
Use the <W> <X> or <Y> <Z> keys
to select a zone. To return to the
center zone, press <0> or the <L>
button again.
You can also tap on the LCD monitor
screen to select a zone. When a zone
is selected, tap [n] on the screen
to switch to automatic selection.
3
Focus on the subject.
Aim the AF point over the subject and
press the shutter button halfway.
X When focus is achieved, the AF point
will turn green and the beeper will
sound.
X If focus is not achieved, the area
frame will turn orange.
4
Take the picture.
Check the focus and exposure, then
press the shutter button completely to
take the picture (p.132).