User Guide

Basic Operation and Settings

You can operate wireless LAN functions by touching the screen as well.

For details, refer to “Using the Touch Screen” in the Camera Instruction

Manual.

Touch Control

Connecting with an Interface Cable

When [53: Wi-Fi] is set to [Enable], interface cable connection is

disabled. Set it to [Disable] to connect the interface cable.

When the camera is connected to a computer, printer, GPS receiver, or

any other devices via an interface cable, the settings for [Wi-Fi] cannot

be changed. Disconnect the interface cable and then configure settings.

Using an Eye-Fi Card

When [53: Wi-Fi] is set to [Enable], image transfer using an Eye-Fi card

is disabled.

COPY