EOS Utility Ver.3.0 for Macintosh Instruction Manual

Introduction

Contents

Downloading

Images

Camera

Settings

Remote

Shooting

Reference

Preferences

Index

 If you do not perform any operation while the camera and computer

are connected, depending on the computer system, a confirmation

message may appear on the screen asking whether you wish to

continue communicating with the camera. If you do not perform an

operation while this message appears, communication with your

camera is discontinued and EU shuts down. In this case, turn the

camera’s power switch to < OFF >, then again to < ON > and start up

EU.

 Do not put your computer to sleep mode while it is connected to the

camera. If your computer goes into sleep mode, never disconnect the

interface cable while your computer is still in sleep mode. Always

wake your computer up while it is still connected to the camera.

Depending on the type of computer, disconnecting the interface cable

while your computer is in sleep mode could prevent the computer

from waking up correctly. Refer to the computer User’s Manual for

more information on sleep mode.

 When a non-Canon flash is mounted on the camera for Remote Live

View shooting, set [Silent shooting] in the camera to [Disable].

Communication between EU and the camera

disconnected

A non-Canon flash does not fire during

Remote Live View shooting

COPY