EOS 6D (WG) Wi-Fi Function Instruction Manual

88
These instructions are continued from Chapter 5.
To connect in camera access point mode, see “Using Camera Access
Point Mode to Establish a Connection” (p.46).
1
Select the printer to connect to.
When a list of detected printers is
displayed, select the printer to
connect to and press <0>.
X Some printers may make a beeping
sound.
When 16 or more printers are
detected or search takes over 3
minutes, you can select [Search
again].
2
Perform further settings.
To finish settings in this stage, press
the <V> key to select [OK], then
press <0> to go to step 3.
To change the name of the settings,
select [Settings name] and press
<0>.
X The virtual keyboard is displayed
(p.14). Up to 30 characters can be
entered for a settings name.
Using Infrastructure Mode to Establish a Connection
COPY