Instruction Manual

229

Easy Wireless Flash Shooting

You can have multiple slave units fire as if they were a single Speedlite.

This is convenient when you need a large flash output.

Basic settings:

Flash mode : E-TTL II

E-TTL II meter. : Evaluative

Built-in flash : EasyWireless

Channel : (Same as slave units)

All the slave units will fire at the same

output and be controlled to obtain a

standard exposure.

No matter what the slave ID is (A, B, or

C), all the slave units will fire as one

group.

If the flash exposure looks too dark or too bright, you can set flash

exposure compensation to adjust the slave units’ flash output.

Select [Flash exposure

compensation], then press <0>.

If the flash exposure is too dark, press the

> key to increase the flash exposure

and make it brighter. If the flash exposure is

too bright, press the <

> key to decrease

the flash exposure and make it darker.

Fully Automatic Shooting with Multiple External Speedlites

Flash Exposure Compensation

COPY