Instruction Manual

211
Viewing the Images on TV
For HDMI CEC TV sets
When a TV set compatible with HDMI CEC* is connected to the camera with the
HDMI cable, you can use the TV set’s remote control for playback operations.
* An HDMI-standard function enabling you to control multiple HDMI devices with one remote control unit.
1
Select [Ctrl over HDMI].
Under the [4] tab, select [Ctrl over
HDMI], then press <0>. Select
[Enable], then press <0>.
X
When the camera is connected to a TV
set, the TV set’s input will automatically
switch to the HDMI port connected to the
camera. When you press the camera’s
<
x > button, you can use the TV set’s
remote control for playback operations.
2
Select an image or movie.
Point the remote control to the TV set and
press the
 /  button to select the image.
Then press the Enter button.
X The menu will appear. The menu displayed
will differ for still photos and movies.
Press the  /  button to select the desired
option, then press the Enter button.
X For a slide show, press the remote
control’s / button to select an
option, then press the Enter button.
If you select [ Return ] and press the Enter
button, the menu will disappear and you can
use the
 /  button to select an image.
Still photo playback menu
Movie playback menu
Some TV sets require you to first enable the HDMI CEC connection. For
details, see the TV set’s instruction manual.
Certain TV sets, even those compatible with HDMI CEC, may not operate properly.
In such a case, disconnect the HDMI cable, set the camera’s [
4 Ctrl over
HDMI
] menu to [ Disable ], and use the camera to control the playback operation.
: Return
: 9-image index
: Slide show
: Disp. shooting info
: Rotate
: Play movie
COPY