User Guide

W-44
This section explains how to connect the camera and Connect Station
(sold separately) wirelessly. To save images in other ways, refer to the
Connect Station Instruction Manual.
 Set up the camera to allow use of its NFC function in advance
(p.W-16).
1
Enable the NFC function on the
camera (p.W-16).
2
Hold the camera close to Connect
Station.
 Turn on the camera and Connect
Station, then hold the camera’s P
mark close to the Connect Station’s
NFC connect point.
 When a message indicating the
connection is being established is
displayed on the camera’s LCD
monitor and Connect Station
responds, move the camera away
from Connect Station.
 When a connection is established,
Connect Station checks the images
on the memory card, then saves only
the unsaved images.
3
Terminate the connection.
 After images are saved, the screen
on the left will appear on the camera’s
LCD monitor. Press <0> to
terminate the connection.
Saving Images
NFC connect point