User Guide

489
3 Custom Function SettingsN
C.Fn3: Disp./Operation
Warnings z in viewfinder
C.Fn3
When any of the following functions are set, the <z> icon can be
displayed in the viewfinder and on the LCD panel (p.31).
Select the function for which you want the warning icon to appear, then
press <0> to add a checkmark [X]. Then select [OK] to register the
setting.
When monochrome V is set
If the Picture Style is set to [Monochrome] (p.185), the warning
icon will appear.
When WB is corrected
If white balance correction is set (p.198), the warning icon will
appear.
When one-touch image quality is set
If you change the image-recording quality with the one-touch
image quality setting function (p.507), the warning icon will appear.
When M is set
If [z3: High ISO speed NR] is set to [Multi Shot Noise
Reduction] (p.202), the warning icon will appear.
When HDR is set
If [z3: HDR mode] is set (p.263), the warning icon will appear.
If you set any of the checkmarked [X] functions, <z> will also appear for
the respective setting displayed on the Quick Control screen (p.64) and
Custom Quick Control screen (p.510).