Digital Camera User Manual

Whenever you set the power switch to <1> or <2>, the Self

Cleaning Sensor Unit operates to automatically shake off the dust on

the front of the sensor. Normally, you need not pay attention to this

operation. However, you can choose to perform sensor cleaning at any

time, or disable it.

Select [Sensor cleaning].

Under the [53] tab, select [Sensor

cleaning], then press <0>.

Select [Clean nowf].

Select [Clean nowf], then press

<0>.

Select [OK] on the dialog screen,

then press <0>.

X The screen will indicate that the

sensor is being cleaned. Although

there will be a shutter sound during

the cleaning, a picture is not taken.

In step 2, select [Auto cleaningf] and set it to [Disable].

X The sensor cleaning will no longer be executed when you set the

power switch to <1> or <2>.

f Automatic Sensor Cleaning

Cleaning the Sensor Now

Disabling Automatic Sensor Cleaning

For best results, perform the sensor cleaning while the camera bottom is

placed on a table or other flat surface.

Even if you repeat the sensor cleaning, the result will not improve much.

Immediately after the sensor cleaning is finished, the [Clean nowf]

option will remain disabled temporarily.