User Guide

198
If there is a problem, first refer to this Troubleshooting Guide. If this
Troubleshooting Guide does not resolve the problem, contact your
dealer or nearest Canon Service Center.
Do not recharge any battery pack other than genuine Canon Battery
Pack BP-511A, BP-514, BP-511, or BP-512.
The battery is not properly installed in the camera (p.26).
Recharge the battery (p.24).
Make sure the battery compartment cover is closed (p.26).
Make sure the card slot cover is closed (p.29).
If the power is cut off while an image is being recorded to the card, the
access lamp will light/blink for a few sec. After the image is recorded to
the card, the camera turns off automatically.
Use a fully-charged battery (p.24).
The rechargeable battery will degrade after repeated use. Purchase a
new one.
Auto power off is in effect. If you do not want auto power off to take
effect, set the [5 Auto power off] menu to [Off].
Troubleshooting Guide
Power
The battery cannot be recharged with the battery charger
provided.
The camera does not operate even when the power switch is
set to <1>.
The access lamp still blinks even when the power switch is
set to <2>.
The battery becomes exhausted quickly.
The camera turns off by itself.
COPY