Operation Manual

148

Whenever you set the power switch to <1/J> or <2>, the Self

Cleaning Sensor Unit operates to automatically shake off the dust on

the front of the sensor. Normally, you need not be aware of this

operation. However, you can execute the sensor cleaning at anytime as

well as disable it.

Select [Sensor cleaning].

Under the [6] tab, select [Sensor

cleaning], then press <0>.

Select [Clean nowf].

Turn the <5> dial to select [Clean

nowf], then press <0>.

Select [OK], then press <0>.

X The screen will indicate that the

sensor is being cleaned. Although

there will be a shutter sound, a

picture is not taken.

In step 2, select [Auto cleaningf] and set it to [Disable].

X The sensor cleaning will no longer be executed when you set the

power switch to <1/J> or <2>.

3 Automatic Sensor Cleaning

Cleaning the Sensor Now

Disabling Automatic Sensor Cleaning

For best results, do the sensor cleaning while the camera bottom is

placed on a table or other surface at a perpendicular angle.

Even if you repeat the sensor cleaning, the result will not improve that

much. Right after the sensor cleaning is finished, the [Cleaning

nowf] option will remain disabled temporarily.

COPY