User Guide

135
wPrinting with PictBridge
With step 4, select the item. When
is displayed, press the
<C> button. You can then set the
parameters for fine adjustments.
The parameters that can be adjusted
for the selected item are shown in the
table below.
Turn the <5> dial to select the item
to be adjusted, then press <0>.
Printing Adjustments
(k: Adjustable)
Turn the <5> dial to make the
adjustment, then press <0>.
Adjustment of Printing Effects
Item
Off / On / Vivid /
Natural
Natural M
B/W / Cool tone /
Warm tone
Brightness
k k k
Adjust levels
– k k
k Brightener
k k k
Red-eye corr.
k k k
Detail
set.
Contrast
–
k k
Saturation
k
–
Color tone
k
Color balance
k
After making fine adjustments for the printing effect, if you do step 4 again to
change the printing effect’s setting, the adjustments will all revert to the default.
When [Default] is selected, the printing adjustments can not be adjusted.
[Brightness]