Digital Camera Lens INSTRUCTIONS EOS-1V, EOS-1V HS

111
Personal Functions
Personal Functions enable you to further customize your camera settings.
They are set with EOS LINK SOFTWARE ES-E1 (sold separately,
→p.130)
which connects the EOS-1V to a personal computer.
P.Fn-0 (Custom Function group registration) can be set with the EOS-1V
body as well.
Personal Functions
P.Fn-0
P.Fn-1
P.Fn-2
P.Fn-3
P.Fn-4
P.Fn-5
P.Fn-6
P.Fn-7
P.Fn-8
P.Fn-9
P.Fn-10
P.Fn-11
P.Fn-12
P.Fn-13
P.Fn-14
P.Fn-15
P.Fn-16
P.Fn-17
P.Fn-18
P.Fn-19
P.Fn-20
P.Fn-21
P.Fn-22
P.Fn-23
P.Fn-24
P.Fn-25
P.Fn-26
P.Fn-27
P.Fn-28
P.Fn-29
P.Fn-30
Custom Function group registration.
Disables unwanted picture-taking mode(s).
Disables unwanted metering mode(s).
Specifies the metering mode for manual exposure.
Sets the maximum and minimum shutter speeds to be used.
Sets the maximum and minimum apertures to be used.
Registers and switches the shooting mode and metering mode.
Repeats AEB during continuous shooting.
Sets AEB only for the first two frames.
Changes the AEB sequence for C.Fn-9-2/3 to overexposure, correct exposure, and underexposure.
Maintains the shift amount for program shift.
Prevents cancellation of multiple exposures.
Sets the AI Servo AF’s subject-tracking sensitivity.
AI Servo AF continuous shooting is executed according to the film advance speed.
Disables AF lens driving for focus search.
Disables the AF-assist beam from being emitted.
Enables the picture to be taken automatically when focus is achieved at the fixed point of focus while the shutter button is pressed completely.
Prevents automatic focusing point selection from being set.
Enables automatic focusing point selection when C.Fn-11-2 has been set.
Sets the film advance mode’s continuous shooting speed for when the Power Drive Booster is attached.
Limits the number of frames exposed during continuous shooting.
Enables silent (low-speed) film advance when the shutter button is OFF after picture-taking.
Disables the shutter release when film has not been loaded.
The function activation timer after the button is pressed can be changed to a different time length ( , , etc.).
Prevents the LCD panel illumination from turning off during bulb exposures.
Changes the default settings implemented when the CLEAR button is ON.
Shortens the shutter release time lag.
Enables the electronic dial’s function to be used in the reverse direction.
Prevents exposure compensation with the Quick Control Dial.
Issues a warning when there is enough memory to store shooting data for only a few more rolls of film.
Changes the imprinting density of the film ID.
16
6
SEC.07 P095-114 (E) 29-01-2003 12:29 Pagina 111