Instruction manual

Handling Error Messages

Is the pairing software running?

X Start the pairing software and follow the instructions to re-establish the

connection (p.44).

Is the target computer on?

X Turn on the target computer.

What to check on the camera

Is the camera’s network setting set to [Auto setting], or its IP

address setting set to [Auto assign]?

X If you are not using a DHCP server, set the camera’s network setting

to [Manual setting] and IP address setting to [Manual setting] (p.17).

What to check on the DHCP server

Is the DHCP server on?

X Turn the DHCP server on.

Are there enough addresses for assignment by the DHCP server?

X Increase the number of addresses assigned by the DHCP server.

X Remove devices assigned addresses by the DHCP server from the

network to reduce the number of addresses in use.

11: Connection target not found

12: Connection target not found

21: No address assigned by DHCP server

COPY