EOS Utility for Windows Instruction Manual (for EOS DIGITAL cameras released in 2006 or earlier)

3434
1
2
3
4
Introduction
Contents at
a Glance
Downloading
Images
Camera
Settings
Remote
Shooting
Reference
Preferences
Index
O To register the modes and settings, first press the < > button
before the < > button. If you press the < > button first,
the camera will only select the registered modes and settings
instead.
O Bulb cannot be preset.
O You cannot select the registered modes and settings during
continuous shooting.
O If P.Fn-03 has been set to specify the metering mode for manual
exposure, and P.Fn-06 is used to register the manual exposure
mode and a metering mode different from the one specified with
P.Fn-03, you can select the metering mode specified with P.Fn-03
by pressing the < > button.
O If P.Fn-04 and/or P.Fn-05 has been set, set the shutter speed and
aperture within the range specified with P.Fn-04 and/or P.Fn-05.
O If the shooting and metering modes you want to set are excluded
by the restrictions in P.Fn-01 and P.Fn-02, those Personal
Functions must be disabled. For information on clearing and
resetting Personal Functions, refer to “Clearing and Resetting
Personal Functions” in the camera’s Instruction Manual provided
with the camera.
O Even if the shooting and metering modes selected by P.Fn-06 are
excluded by the restrictions in P.Fn-01 and P.Fn-02, they are still
valid for P.Fn-06.
O If C.Fn-4-1 or C.Fn-4-3 has been set, AF and AE will also take
effect when you press the < > button.
O When C.Fn-18 is set, P.Fn-06 is disabled.
Repeats bracketing during continuous shooting
O While you hold down the shutter button, bracketing repeats
continuously in the currently selected drive mode.
O This function is useful when you want to continuously repeat the
bracketing sequence.
Sets the number of shots to be bracketed
O Select the number of shots from the list box.
O The usual 3-shot bracketing is changed to 2-, 3-, 5-, or 7-shot
bracketing.
O In bracketing shots, if you select 5-shot bracketing with 1-stop
increment, the bracketing for the shots is –2, –1, 0, +1 and +2.
O This function is useful for adjusting the range of bracketing.
Changes the bracketing sequence for C.Fn-09-2/
3 to increased exposure, standard exposure, and
decreased exposure
O The bracketing sequence when C.Fn-09-2/3 is selected (decreased
exposure  standard exposure  increased exposure) changes to
increased exposure  standard exposure  decreased exposure.
O This function is useful when you want to start the bracketing
sequence with a increased exposure.
O Even when the setting is outside the bracketing level display
range, the exposure is compensated as specified.
O This function can be used in combination with C.Fn-09-2/3 and
P.Fn-09.
This function can be used in combination with P.Fn-08.
P.Fn-07
P.Fn-08
P.Fn-09
COPY