EOS Utility for Windows Instruction Manual (for EOS DIGITAL cameras released in 2006 or earlier)

9
1
2
3
4
Introduction
Contents at
a Glance
Downloading
Images
Camera
Settings
Remote
Shooting
Reference
Preferences
Index
Connect the camera and computer with the interface cable provided
with your camera.
1
Connect the plug of the cable with the < > mark
into the computer’s USB port.
O For the location and direction of the USB port, refer to the
computer User’s Manual.
2
Connect the plug of the cable with the < > mark to
the < > terminal on your camera.
O Connect with the < > mark on the plug facing the back of the
camera.
O Image downloading preparation is now complete. Continue with
“Starting up EU” (Description on the right).
Connecting the D60, D30 and a Computer
Starting up EU
When the camera’s power switch is set to < ON >, EU will start up, and
the camera and computer will be able to communicate.
The start up process will vary depending on your camera model, so
follow the start up instructions for your camera model below.
O Starting up EU with Cameras other than the 1D Series (p.10)
O Starting up EU with the 1D Series Cameras (p.11)
5D
30D
20D
10D
REBELXTi
400D
REBELXT
350D
REBEL
300D
D60
D30
1D Mk II N
1Ds Mk II
1D Mk II
1Ds
1D
COPY